Período: 2016/08/01 – 2021/10/06 Concluído
Grau: Engineering (Doctor of Philosophy) Especialização em Mechanical Dr BR Ambedkar National Institute of Technology, Índia “Experimental Investigation of Mechanical and Metallurgical Properties of MIG Brazed Joints” (TESE/DISSERTAÇÃO)

Período: 2023/09/11 – Atual
Grau: Pós-doutorado (Investigação)
Classificação: Universidade NOVA de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Período:
Grau:

Período: 2022/07/20 – 2023/08/31
Grau: Professor Auxiliar (Docente Universitário)
Classificação: Teerthanker Mahaveer Institute of Management and Technology, Índia

Período:
Grau:

Período: Artigo em revista
Grau: Jaivindra Singh; Kanwer Singh Arora; João P. Oliveira; Brajesh Asati. “Comparative analysis of MIG brazing modes: process stability, bead morphology, microstructure, and mechanical properties”. The International Journal of Advanced Manufacturing Technology (2024): https://doi.org/10.1007/s00170-024-14488-6. 10.1007/s00170-024-14488-6 Jaivindra Singh; J.P. Oliveira; Hunter Taylor; Jorge Mireles; Ryan Wicker. “A holistic approach for evaluation of Gaussian versus ring beam processing on structure and properties in laser powder bed fusion”. Journal of Materials Processing Technology (2024): http://dx.doi.org/10.1016/j.jmatprotec.2024.118293. 10.1016/j.jmatprotec.2024.118293 Sanjay Singh; Manoj Kumar; Jaivindra Singh; Makkhan Lal Meena; Govind Sharan Dangayach; Dinesh Kumar Shukla. “Investigating the Influence of ASAW Process Parameters on Chemical Composition, Mechanical Properties and Corrosion Rate of HSLA Steel Weldments”. Transactions of the Indian Institute of Metals (2023): http://dx.doi.org/10.1007/s12666-023-02945-x. 10.1007/s12666-023-02945-x Sanjay Singh; manoj kumar; Jaivindra Singh; Makkhan Lal Meena; Govind Sharan Dangayach; Dinesh Kumar Shukla; Chandni Khandelwal; Himansh Kumar. “Effect of SAW electrode wire preheating current on its melting rate and weldment properties of HSLA steel joint”. Advances in Materials and Processing Technologies (2023): http://dx.doi.org/10.1080/2374068x.2023.2250147. 10.1080/2374068x.2023.2250147 Gaurav Nandan; Kanwer S. Arora; Jaivindra Singh; Ashok Kumar. “Influence of process parameters on bead geometry and its effect on mechanical properties of CMT welding of automotive grade steel and aluminium alloy using aluminium based filler wire”. Welding International (2023): http://dx.doi.org/10.1080/09507116.2023.2256221. 10.1080/09507116.2023.2256221 Gaurav Nandan; K. S. Arora; Jaivindra Singh; Ashok Kumar. “Influence of Different Process Parameters on Microstructural and Mechanical Properties of Cold Metal Transfer Joining of DP 600 Steel and Al 5052 Alloy”. Journal of Materials Engineering and Performance (2023): http://dx.doi.org/10.1007/s11665-023-08488-y. 10.1007/s11665-023-08488-y Jaivindra Singh; Kanwer Singh Arora; Dinesh Kumar Shukla; Himansh Kumar. “Mechanical and microstructural characterization of cold metal transfer (CMT) spot aluminium-steel weld-brazed joints”. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022): https://doi.org/10.1177/14644207221097709. 10.1177/14644207221097709 Jaivindra Singh; Aniket Singh; Kanwer Singh Arora; Dinesh Kumar Shukla. “Multi-objective Optimization of Process Parameters during Dissimilar Cold Metal Transfer Weld-Brazing of Al-Steel”. Transactions of the Indian Institute of Metals (2022): https://doi.org/10.1007/s12666-022-02567-9. 10.1007/s12666-022-02567-9 “Influence of Novel Torch Type on Mechanical and Microstructural Characteristics of Cold Metal Transfer Brazed Joints”. Journal of Manufacturing Science and Engineering 143 1 (2021): http://dx.doi.org/10.1115/1.4047735. 10.1115/1.4047735 Singh, J.; Singh Arora, K.; Kumar Shukla, D.. “High cycle fatigue performance of cold metal transfer (CMT) brazed C-Mn-440 steel joints”. International Journal of Fatigue 137 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85083884224&partnerID=MN8TOARS. 10.1016/j.ijfatigue.2020.105663 Singh, J.; Arora, K.S.; Shajan, N.; Shome, M.; Shukla, D.K.. “Influence of wire feed rate to speed ratio on arc stability and characteristics of cold metal transfer weld–brazed dissimilar joints”. International Journal of Advanced Manufacturing Technology 108 11-12 (2020): 3491-3505. http://www.scopus.com/inward/record.url?eid=2-s2.0-85087043087&partnerID=MN8TOARS. 10.1007/s00170-020-05637-8 Singh, J.; Arora, K.S.; Shukla, D.K.. “Lap weld-brazing of aluminium to steel using novel cold metal transfer process”. Journal of Materials Processing Technology 283 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85084329710&partnerID=MN8TOARS. 10.1016/j.jmatprotec.2020.116728 Singh, J.; Arora, K.S.; Shajan, N.; Shome, M.; Shukla, D.K.. “Influence of filler wire composition and heat input on microstructure and strength of CMT brazed DP steel joints”. Materials Research Express 6 11 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85073757922&partnerID=MN8TOARS. 10.1088/2053-1591/ab4835 Singh, J.; Singh Arora, K.; Shajan, N.; Shukla, D.K.; Shome, M.. “Role of bead shape and dispersed intermetallic phases in determining the strength of CMT brazed DP780 lap joints”. Journal of Manufacturing Processes 44 (2019): 207-215. http://www.scopus.com/inward/record.url?eid=2-s2.0-85067240222&partnerID=MN8TOARS. 10.1016/j.jmapro.2019.06.007 Singh, J.; Arora, K.S.; Shukla, D.K.. “Dissimilar MIG-CMT weld-brazing of aluminium to steel: A review”. Journal of Alloys and Compounds 783 (2019): 753-764. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059474010&partnerID=MN8TOARS. 10.1016/j.jallcom.2018.12.336

Período: Pré-impressão
Grau: Jaivindra Singh; Kanwer Singh Arora; J. P. Oliveira; Brajesh Asati. “Comparative Analysis of MIG Brazing Modes: Process Stability, Bead Morphology, Microstructure, and Mechanical Properties”. 2024. https://doi.org/10.21203/rs.3.rs-4390609/v1. 10.21203/rs.3.rs-4390609/v1