Morgado, Teresa; Brites, Catarina; Alexandre Velhinho; Rui Silva; António Mourão. Autor correspondente: Morgado, Teresa. “Intrinsic Rheocasting Defect Study of an EN AB-42000 Mechanical Component”. Trabalho apresentado em ICIENG: International Conference Innovation in Engineering, Povoação, 2024. Publicado
Almeida, C.; Cardoso, J.; Coelho, P.; Velhinho, A.; Xavier, J.; Borges, J.. “Architectured and additively manufactured double-negative index metamaterials”. 2022. 10.23967/eccomas.2022.056
A. Velhinho; Morgado, Teresa; Catarina Brites; Rui Jorge Cordeiro Silva; António Mourão. “Structural integrity study of an aluminium automobile mechanical component, obtained by Rheocasting”. Trabalho apresentado em Material TECH2022 An International Conference on Materials and Technologies, Raipur, 2022. Submetido
Velhinho, Alexandre; P.D. Sequeira; Francisco Braz Fernandes; J.D. Botas; Luís Augusto Marques da Rocha. “Al/SiCp Functionally Graded Metal-matrix Composites Produced by Centrifugal Casting: Influence of Casting Parameters on Reinforcement Distribution”. Trabalho apresentado em CBECIMAT 2002 – XV Brazilian Congress on Materials Science and Engineering, Natal, 2002. Publicado
Luís Augusto Marques da Rocha; P.D. Sequeira; Velhinho, Alexandre; C. M. Sá. “Aluminium Matrix Composites Produced by Centrifugal Casting: Microstructural Aspects”. Trabalho apresentado em XVI Mechanical Engineering Brazilian Congress, Uberlândia – MG, 2001. Publicado
Almeida, Cláudia J.; Coelho P G; Guedes, J.M.; Custódio, A. L.; A. Velhinho; Conde, Fábio. “Multiobjective Topology Optimization of metamaterials to analyse the conflicting nature of Negative Poisson’s Ratio and Negative Thermal Expansion”. Structural and Multidisciplinary Optimization (2025): Acesso aberto • Aceite para publicação
Cardoso, João O.; Catatão, Gonçalo; Borges, João Paulo; Velhinho, Alexandre; Cardoso, João O.; Catatão, Gonçalo; Borges, João Paulo; Velhinho, Alexandre. Autor correspondente: Velhinho, Alexandre. “Experimental study of Double-Elliptic-Ring-based thermomechanical metamaterials’ behaviour”. International Journal of Mechanical Sciences 281 (2024): 109552. http://dx.doi.org/10.1016/j.ijmecsci.2024.109552. Acesso aberto • 10.1016/j.ijmecsci.2024.109552
Frederico T. Páscoa; Carla M. Machado; João Cardoso; Borges, J.P.; A. Velhinho; Cardoso, João Oliveira; João Paulo Borges; et al. “Methodology for modelling and simulation of tailored 3D functionally graded auxetic metamaterials”. International Journal Of Advanced Manufacturing Technology 125 9-10 (2023): 4647-4661. https://novaresearch.unl.pt/en/publications/44953225-3184-4ffc-bdec-9deb3454b1e4. Publicado • 10.1007/s00170-023-10863-x
Paulo Quaresma; Medeiros, Pedro Duarte; Adriano Lopes; Alexandre Velhinho. “PSE for Analysis of 3D Tomographic Images”. Annals of Computer Science and Intelligence Systems 35 (2023): 1113-1117. Acesso aberto • Submetido
Morgado, Teresa; Diogo Paulo; A. Velhinho; Mário Pereira; António Mourão. “Fatigue Limit Prediction Models of 6060 Aluminium Extruded Alloy”. Procedia Structural Integrity 42 (2022): 1545-1551. https://www.sciencedirect.com/science/article/pii/S2452321622007521. Acesso aberto • Aceite para publicação
Cardoso, João O.; Borges, João Paulo; Velhinho, Alexandre; Cardoso, João O.; Borges, João Paulo; Velhinho, Alexandre. “Structural metamaterials with negative mechanical/thermomechanical indices: A review”. Progress in Natural Science: Materials International 31 6 (2021): 801-808. http://dx.doi.org/10.1016/j.pnsc.2021.10.015. Acesso aberto • 10.1016/j.pnsc.2021.10.015
Birra, Fernando; Encarnação, Magda; Lopes, Adriano; Medeiros, Pedro; Oliveira, Nuno; Preto, Bruno; Quaresma, Paulo; et al. “Tomographic image analysis of reinforcement distribution in composites using a flexible and material’s specialist-friendly computational environment”. Materials Letters: X 7 (2020): 100046. http://dx.doi.org/10.1016/j.mlblux.2020.100046. Acesso aberto • 10.1016/j.mlblux.2020.100046
Teresa L. Morgado; Ricardo Paulo; Pedro Amaral; Mário Pereira; José Simões; Velhinho, Alexandre; Morgado, Teresa; et al. “Durability study of the AISI 1024HR and AISI 304HR alloys applied in the organic waste industry”. Revista da Associação Portuguesa de Análise Experimental de Tensões 32 (2020): 1-7. http://hdl.handle.net/10362/117018. Acesso aberto • Submetido
Teresa L. Morgado; C. Valente; J. Leunda; Velhinho, Alexandre. “Mechanical Behaviour of the Ti10Ta Alloy Produced by Additive Manufacturing”. Metals and Materials International (2020): Submetido
Cristovão, Ana Filipa; Sousa, David; Silvestre, Filipe; Ropio, Inês; Gaspar, Ana; Henriques, Célia; Velhinho, Alexandre; et al. “Customized tracheal design using 3D printing of a polymer hydrogel: influence of UV laser cross-linking on mechanical properties”. 3D Printing in Medicine 5 1 (2019): http://dx.doi.org/10.1186/s41205-019-0049-8. Acesso aberto • Publicado • 10.1186/s41205-019-0049-8
F. Ferreira; I. Ferreira; E. Camacho; F. Lopes; A.C. Marques; A. Velhinho. “Graphene oxide-reinforced aluminium-matrix nanostructured composites fabricated by accumulative roll bonding”. Composites Part B: Engineering 164 (2019): 265-271. https://doi.org/10.1016/j.compositesb.2018.11.075. Publicado • 10.1016/j.compositesb.2018.11.075
J S Raminhos; J P Borges; A Velhinho. “Development of polymeric anepectic meshes: auxetic metamaterials with negative thermal expansion”. Smart Materials and Structures (2019): https://doi.org/10.1088/1361-665X/ab034b. Publicado • 10.1088/1361-665X/ab034b
Velhinho, Alexandre. “Bio-inspired production of chitosan/chitin films from liquid crystalline suspensions”. Carbohydrate Polymers (2017): 10.1016/j.carbpol.2016.08.039
Sónia Ferreira; Ana Conde; M. Ángeles Arenas; Luís Augusto Marques da Rocha; Velhinho, Alexandre. “Anodization mechanism on SiC nanoparticle reinforced al matrix composites produced by power metallurgy”. Materials 7 (2014): 8151-8167. http://hdl.handle.net/11449/130178. Acesso aberto • Publicado • http://dx.doi.org/10.3390/ma7128151
Sá, S.; Gawande, M.B.; Velhinho, A.; Veiga, J.P.; Bundaleski, N.; Trigueiro, J.; Tolstogouzov, A.; et al. “Magnetically recyclable magnetite-palladium (Nanocat-Fe-Pd) nanocatalyst for the Buchwald-Hartwig reaction”. Green Chemistry 16 7 (2014): 3494-3500. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903143352&partnerID=MN8TOARS. 10.1039/c4gc00558a
Singh, S.J.; Kale, S.R.; Gawande, M.B.; Velhinho, A.; Jayaram, R.V.. “A synthesis of copper based metal-organic framework for O-acetylation of alcohols”. Catalysis Communications 44 (2014): 24-28. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888295957&partnerID=MN8TOARS. 10.1016/j.catcom.2013.10.016
Gandra, J.; Vigarinho, P.; Pereira, D.; Miranda, R.M.; Velhinho, A.; Vilaça, P.. “Wear characterization of functionally graded Al-SiC composite coatings produced by Friction Surfacing”. Materials and Design 52 (2013): 373-383. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879435223&partnerID=MN8TOARS. 10.1016/j.matdes.2013.05.059
Gawande, M.B.; Rathi, A.K.; Branco, P.S.; Potewar, T.M.; Velhinho, A.; Nogueira, I.D.; Tolstogouzov, A.; Ghumman, C.A.A.; Teodoro, O.M.N.D.. “Nano-MgO-ZrO2 mixed metal oxides: Characterization by SIMS and application in the reduction of carbonyl compounds and in multicomponent reactions”. RSC Advances 3 11 (2013): 3611-3617. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874050617&partnerID=MN8TOARS. 10.1039/c2ra22511e
Gawande, M.B.; Velhinho, A.; Nogueira, I.D.; Ghumman, C.A.A.; Teodoro, O.M.N.D.; Branco, P.S.. “A facile synthesis of cysteine-ferrite magnetic nanoparticles for application in multicomponent reactions – A sustainable protocol”. RSC Advances 2 15 (2012): 6144-6149. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863921269&partnerID=MN8TOARS. 10.1039/c2ra20955a
Gawande, M.B.; Rathi, A.K.; Branco, P.S.; Nogueira, I.D.; Velhinho, A.; Shrikhande, J.J.; Indulkar, U.U.; et al. “Regio- and chemoselective reduction of nitroarenes and carbonyl compounds over recyclable magnetic ferrite-nickel nanoparticles (Fe 3O 4-Ni) by using glycerol as a hydrogen source”. Chemistry – A European Journal 18 40 (2012): 12628-12632. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867043284&partnerID=MN8TOARS. 10.1002/chem.201202380
Manoj B. Gawande; Anuj Rathi; Paula S. Branco; Isabel D. Nogueira; Velhinho, Alexandre; Janhavi Shirkhande; Utkarsha Indurkar; et al. “Reduction of Nitroarenes and Carbonyl Compounds with Ni–Fe3O4 MNPs”. Synfacts 8 (2012): 1388-1388. Publicado
Velhinho, A.; Rocha, L.A.. “Longitudinal centrifugal casting of metal-matrix functionally graded composites: An assessment of modelling issues”. Journal of Materials Science 46 11 (2011): 3753-3765. http://www.scopus.com/inward/record.url?eid=2-s2.0-79953786581&partnerID=MN8TOARS. 10.1007/s10853-011-5289-y
Gandra, J.; Miranda, R.; Vilaa, P.; Velhinho, A.; Teixeira, J.P.. “Functionally graded materials produced by friction stir processing”. Journal of Materials Processing Technology 211 11 (2011): 1659-1668. http://www.scopus.com/inward/record.url?eid=2-s2.0-79961171707&partnerID=MN8TOARS. 10.1016/j.jmatprotec.2011.04.016
Ferreira, S.C.; Velhinho, A.; Silva, R.J.C.; Rocha, L.A.. “Corrosion behaviour of aluminium syntactic functionally graded composites”. International Journal of Materials and Product Technology 39 1-2 (2010): 122-135. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955180195&partnerID=MN8TOARS. 10.1504/IJMPT.2010.034265
Cadavez, T.; Ferreira, S.C.; Medeiros, P.; Quaresma, P.J.; Rocha, L.A.; Velhinho, A.; Vignoles, G.. “A graphical tool for the tomographic characterization of microstructural features on metal matrix composites”. International Journal of Tomography and Statistics 14 S10 (2010): 3-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-79751497413&partnerID=MN8TOARS.
Botas, J.D.; Velhinho, A.; Silva, R.J.C.. “A theoretical approach to the elastic behaviour of compact and hollow spherical particles reinforced metal-matrix composites”. International Journal of Materials Research 101 6 (2010): 752-757. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954004170&partnerID=MN8TOARS. 10.3139/146.110342
Quaresma, Paulo Jorge; Medeiros, Pedro Duarte; Velhinho, Alexandre. “Processamento paralelo aplicado a um problema de engenharia de materiais”. (2007): http://hdl.handle.net/10400.2/1287.
Velhinho, Alexandre; Braz Fernandes, Francisco Manuel; Ferreira, S.C.; Rocha, L.A.; Vignoles, Gerard; Cloetens, P.. “Application of X-Ray Microtomography to the Microstructural Characterization of Al-Based Functionally Graded Materials”. Advances in Science and Technology 45 (2006): 1109-1116. http://dx.doi.org/10.4028/www.scientific.net/ast.45.1109. 10.4028/www.scientific.net/ast.45.1109
Velhinho, Alexandre; Sequeira, P.D.; Braz Fernandes, Francisco Manuel; Botas, José D.; Rocha, L.A.. “Al/SiCp Functionally Graded Metal-Matrix Composites Produced by Centrifugal Casting: Effect of Particle Grain Size on Reinforcement Distribution”. Materials Science Forum 423-425 (2003): 257-262. http://dx.doi.org/10.4028/www.scientific.net/msf.423-425.257. 10.4028/www.scientific.net/msf.423-425.257
Velhinho, Alexandre; Sequeira, P.D.; Martins, Rui Miguel S.; Vignoles, Gerard; Braz Fernandes, Francisco Manuel; Botas, José D.; Rocha, L.A.. “Evaluation of Al/SiC Wetting Characteristics in Functionally Graded Metal-Matrix Composites by Synchrotron Radiation Microtomography”. Materials Science Forum 423-425 (2003): 263-268. http://dx.doi.org/10.4028/www.scientific.net/msf.423-425.263. 10.4028/www.scientific.net/msf.423-425.263
Velhinho, A.; Sequeira, P.D.; Martins, R.; Vignoles, G.; Braz Fernandes, F.; Botas, J.D.; Rocha, L.A.; et al. “X-ray tomographic imaging of Al/SiCp functionally graded composites fabricated by centrifugal casting”. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 200 (2003): 295-302. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037249782&partnerID=MN8TOARS. 10.1016/S0168-583X(02)01691-9
Velhinho, Alexandre; Braz Fernandes, Francisco Manuel; Botas, José D.; Velhinho, A.; Fernandes, F.M.B.; Botas, J.D.. “Microstructural Study of Aluminium-Matrix Composites Reinforced with SiC”. Key Engineering Materials 230-232 (2002): 226-230. http://dx.doi.org/10.4028/www.scientific.net/kem.230-232.226. Publicado • 10.4028/www.scientific.net/kem.230-232.226
Velhinho, A.; Lopes, A.; Preto, B.; Birra, F.; Encarnação, M.; Oliveira, N.; Quaresma, P.; Medeiros, P.; Ferreira, S.. “A Problem-Solving Environment for reinforcement distribution characterization in composites using tomographic images”, Ciencia e Tecnologia dos Materiais, 2012, http://www.scopus.com/inward/record.url?eid=2-s2.0-84894128890&partnerID=MN8TOARS.
Quaresma, Paulo Jorge; Lopes, Adriano; Medeiros, Pedro; Preto, Bruno; Velhinho, Alexandre. “Tomo-GPU: a problem-solving environment for analysing tomographic data of structural characterization of materials”, Revista de Ciências da Computação, 2010, https://journals.uab.pt/index.php/rcc/article/view/30.
Quaresma, Paulo Jorge; Medeiros, Pedro Duarte; Lopes, Adriano; Preto, Bruno; Velhinho, Alexandre. “Tomo-GPU: um ambiente de resolução de problemas destinado à análise de dados tomográficos relativos à caracterização estrutural de materiais”, Revista de Ciências da Computação, 2010, http://hdl.handle.net/10400.2/1891.
Quaresma, Paulo Jorge; Medeiros, Pedro Duarte; Velhinho, Alexandre. “Parallel processing applied to a materials engineering problem”, Revista de Ciências da Computação, 2007, https://journals.uab.pt/index.php/rcc/article/view/67.
Morgado, Teresa; Catarina Valente; Josu Leunda; Alexandre Velhinho; Rui Jorge Cordeiro Silva; Teresa Morgado; Alexandre Velhinho; Rui Silva. Autor correspondente: Morgado, Teresa. “Fatigue Behavior of the Titanium-Tantalum Alloy Obtained by Additive Manufacturing”. In Fatigue and Fracture of Materials and Structures, editado por Grzegorz Lesiuk; Szymon Duda; José A. F. O. Correia; Abílio M. P. De Jesus, 341-349. Springer Cham, 2022. Publicado • 10.1007/978-3-030-97822-8_40
Francisco Manuel Braz Fernandes; A. Velhinho; Rui Jorge Cordeiro Silva. “Functionally Graded Materials”. Metals (2019): https://www.mdpi.com/journal/metals/special_issues/functionally_graded_materials#info. Publicado • Co-editor
Filipe Samuel Silva; Luís Augusto Marques da Rocha; A. Velhinho. “Multifunctional, Multiscale and Functionally Graded Materials”. International Journal of Materials and Product Technology 42 1/2 (2011): https://www.inderscience.com/info/inarticletoc.php?jcode=ijmpt&year=2011&vol=42&issue=1/2. Publicado • Co-editor
Silva, Samuel; Rocha, L A; Velhinho, A.. “Filipe Samuel Silva, Luís Augusto Rocha e Alexandre da Costa Velhinho – Guest Editors special number on “Advances in Functionally Graded Materials” (Vo. 42, Nos. 1/2, 2011). Twelve papers published”. International Journal of Materials and Product Technology 42 1/2 (2011): https://www.inderscience.com/info/inarticletoc.php?jcode=ijmpt&year=2011&vol=42&issue=1/2. Publicado
Ferreira, S.C.; Velhinho, A.; Rocha, L.A.; Fernandes, F.M.B.. Microstructure characterization of aluminium syntactic functionally graded composites containing hollow ceramic microspheres: Manufactured by radial centrifugal casting. 2008.
Botas, J.D.; Velhinho, A.; Silva, R.J.C.; Botas, José D.; Velhinho, Alexandre; Silva, Rui Jorge C.. Elastic behaviour of spherical particles reinforced metal-matrix composites. 2008. 10.4028/www.scientific.net/msf.587-588.202
Silva, N.; Velhinho, A.; Silva, Nelson; Velhinho, Alexandre. Assessment of particle clustering in MMCs by quantitative image analysis. 2006. 10.4028/www.scientific.net/msf.514-516.779
Velhinho, A.; Botas, J.D.; Ariza, E.; Gomes, J.R.; Rocha, L.A.. Tribocorrosion studies in centrifugally cast Al-matrix SiC p-reinforced functionally graded composites. 2004.
Velhinho, A.; Sequeira, P.D.; Martins, R.; Vignoles, G.; Fernandes, F.B.; Botas, J.D.; Rocha, L.A.. Evaluation of Al/SiC wetting characteristics in functionally graded metal-matrix composites by synchrotron radiation microtomography. 2003.
Velhinho, A.; Sequeira, P.D.; Braz Fernandes, F.; Botas, J.D.; Rocha, L.A.. Al/SiCp functionally graded metal-matrix composites produced, by centrifugal casting: Effect of particle grain size on reinforcement distribution. 2003.
Encarnação, Magda; Lopes, Adriano; Preto, Bruno; Birra, Fernando; Oliveira, Nuno; Quaresma, Paulo; Medeiros, Pedro; Velhinho, Alexandre. “Tomographic image analysis of materials samples with a user-friendly modular computational environment”. Trabalho apresentado em 2nd Meeting of Synchrotron Radiation Users from Portugal, Sincrotrão (2nd ENURS and ESRF Day), Pavilhão do Conhecimento, Portugal, 2013.
Preto, Bruno; Lopes, Adriano; Velhinho, Alexandre; Birra, Fernando; Encarnação, Magda; Oliveira, Nuno; Medeiros, Pedro. “A GPU-Enabled algorithm for 3D image labeling”. Trabalho apresentado em ENURS – 1º Encontro Nacional dos Utilizadores da Radiação de Sincrotrão, CENIMAT, FCT/UNL, 2012.
Karimbi Koosappa Mahesh; R.J.C. Silva; Francisco Manuel Braz Fernandes; A. Velhinho; Carlos Chastre; Lúcio, V.; Rui F. Martins. 2012. Smart Composites (CENIMAT report). https://unl.elsevierpure.com/en/publications/27a945fa-f8cb-4097-b93f-d55159e9fb12.
João Oliveira Cardoso; Alexandre Velhinho; João Paulo Borges; Carla M. Machado; Frederico T. Páscoa; Catalão, Gonçalo Jorge Sousa. “Design strategies for 3D functionally graded structural metamaterials”. Trabalho apresentado em ISFGM 2024 – 17th International Symposium on Functionally Graded Materials, Braga, 2024. Publicado
S.N. Fernandes; A.B.A. da Silva; E.L. Monteiro; Catarina Leal; T. Vieira; J.C. Silva; Alexandre Velhinho; João Paulo Borges. “Enhancing Mechanical and Thermoresponsive Properties of Polysaccharide-based Injectable Hydrogels for Biomedical Applications with Cellulose Nanocrystals”. Trabalho apresentado em IBEREO Lisboa 2024 – The Iberian Meetings on Rheology, Lisbon, 2024. Publicado
Teresa Morgado; D. Paulo; Beatriz Arraiano; Alexandre Velhinho; A. Pereira; António Mourão. “Study of Fatigue limit and fatigue threshold Prediction approach for cast aluminium alloy AlSi7Mg”. Trabalho apresentado em ICEM20 20th International Conference on Experimental Mechanics, Oporto, 2023. Publicado
João Oliveira Cardoso; Patrícia Almeida; Gonçalo Catatão; Guilherme Cândida; Frederico Páscoa; Daniela Silva; Carla Machado; João Paulo Borges; Alexandre Velhinho. Autor correspondente: João Oliveira Cardoso. “Designing Structural Metamaterials”. Trabalho apresentado em MATERIAIS 2022, XX Congresso da Sociedade Portuguesa de Materiais, XI International Symposium on Materials and II Iberian Congress on Materials Science and Technology, Marinha Grande, 2022. Publicado
Morgado, Teresa; Paulo, D.; Velhinho, A.; Pereira, A. M.; Mourão, A.. Autor correspondente: Morgado, Teresa. “Fatigue Life Prediction of 6060 extruded Aluminium”. Trabalho apresentado em ECF23, European Conference on Fracture, Funchal, 2022. Publicado
Beatriz Arraiano; Teresa L. Morgado; Velhinho, Alexandre. “Study of the fatigue limit of a cast aluminium alloy AlSi7Mg”. Trabalho apresentado em 19th International Colloquium on Mechanical Fatigue of Metals, Porto, 2018. Publicado
R. Paulo; Teresa L. Morgado; Velhinho, Alexandre; Carla Machado; J. Pamies Teixeira. “Evaluation and Characterization of Wear Behaviour of Rolled Steels for the Production of a Screw”. Trabalho apresentado em 6th International Conference on INTEGRITY-RELIABILITY-FAILURE, Lisboa, 2018. Publicado
M. Mousinho; Teresa L. Morgado; D. Braga; Velhinho, Alexandre; Carla Machado; J. Pamies Teixeira. “Study of Wear Behaviour of a Helical Gear”. Trabalho apresentado em 6th International Conference on INTEGRITY-RELIABILITY-FAILURE, Lisboa, 2018. Publicado
João Pedro Oliveira; Patrick L. Inácio; Carlos P. Simão; Edgar Camacho; Rosa Maria Miranda; Velhinho, Alexandre; Francisco Braz Fernandes. “Production of composite materials fabricated by additive manufacturing: evaluation of different NDT techniques for defect detection”. Trabalho apresentado em 6th International Conference on INTEGRITY-RELIABILITY-FAILURE, Porto, 2018. Publicado
Patrick L. Inácio; Edgar Camacho; P.F. Rodrigues; Rosa Maria Miranda; Velhinho, Alexandre; Francisco Braz Fernandes; Telmo G. Santos. “Evaluation of functionally graded Ni-Ti wires for additive manufacturing of composites”. Trabalho apresentado em 12th European conference on Non-Destructive Testing (ECNDT2018), Gotemburgo, 2018. Publicado
Velhinho, Alexandre; Beatriz Arraiano; Teresa L. Morgado; Carla M. Machado; J. Pamies Teixeira. “Aluminium alloys behaviour in the foundry process”. Trabalho apresentado em CIBEM 2017, 13º Congresso Ibero-americano de Engenharia Mecânica, Lisboa, 2017. Publicado
António Torres Marques; João Pereira; Rui Neto; Paulo Peças; Sílvia Esteves; João Matos; Rui Moreira; et al. “Additive Manufacturing Based Hybrid Processes for Long or Continuous Fiber Reinforced Polimeric Matrix Composites”. Trabalho apresentado em CIBEM 2017, 13º Congresso Ibero-americano de Engenharia Mecânica, Lisboa, 2017. Publicado
Carlos João; Coro Echeverria; Velhinho, Alexandre; Jorge C. Silva; Maria H. Godinho; João Paulo Borges. “Structures with Imprinted Liquid Crystalline Architecture for Bone Tissue Engineering”. Trabalho apresentado em ESB 2017 – The 28th Annual Conference of the European Society for Biomaterials, Atenas, 2017. Publicado
Velhinho, Alexandre; Gonçalo Rodrigues; José Paulo Mota. “Modelling of transverse segregation on centrifugally-cast functionally graded composites”. Trabalho apresentado em International CAE Conference 2014, Pacengo del Garda (Verona), 2014. Publicado
João Gandra; Rosa Maria Miranda; Pedro Vilaça; Velhinho, Alexandre. “Production of Functionally Graded Surface Composites by Friction Surfacing”. Trabalho apresentado em International Conference on Mechanics of Nano, Micro and Macro Composite Structures, June 18-20th, 2012, Turim, 2012. Publicado
Bruno Preto; Fernando Birra; Pedro Medeiros; Adriano Lopes; Velhinho, Alexandre. “3D object labeling using OpenCL”. Trabalho apresentado em INPAR 2012 – Innovative Parallel Computing: Foundations & Applications of GPU, Manycore, and Heterogeneous Systems, San Jose, 2012. Publicado
Velhinho, Alexandre. “Modelling of microstructural development dynamics of FGM composites produced by longitudinal centrifugal casting”. Trabalho apresentado em FGM2010 – 11th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Guimarães, 2011. Publicado
C. M. Craciunescu; Francisco Braz Fernandes; Velhinho, Alexandre. “Grading of Thermoelastic Martensitic Transformation in Shape Memory Alloys”. Trabalho apresentado em FGM2010 – 11th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Guimarães, 2010. Publicado
J. Gandra; Rosa Maria Miranda; Pedro Vilaça; Velhinho, Alexandre; J. Pamies Teixeira. “Producing FGMs by FSP – a preliminary study”. Trabalho apresentado em FGM2010 – 11th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Guimarães, 2010.
Velhinho, Alexandre; Sónia C. Ferreira; Rui J. C. Silva; Luís Augusto Marques da Rocha. “Effects of reinforcement gradient on the corrosion behavior of ceramic microballoon–reinforced aluminium functionally graded composites using EIS”. Trabalho apresentado em FGM2008 – 10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, 2009. Publicado
Sónia C. Ferreira; Velhinho, Alexandre; Luís Augusto Marques da Rocha; P.J. Quaresma; T. Cadavez; Pedro Medeiros. “3D Microstructural Characterization of Ceramic Microballoon-reinforced Functionally Graded Composites Using X-ray Microtomography”. Trabalho apresentado em FGM2008 – 10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, 2008. Publicado
Sónia C. Ferreira; Velhinho, Alexandre; Luís Augusto Marques da Rocha; Francisco Braz Fernandes. “Al-based Syntactic Functionally Graded Composites: Influence of Casting Parameters on Reinforcement Distribution”. Trabalho apresentado em FGM2006 – Multiscale and Functionally Graded Materials Conference, Honolulu, 2006. Publicado
Sónia C. Ferreira; Velhinho, Alexandre; Rui J.C. Silva; Luís Augusto Marques da Rocha. “Modelling of Centrifugal Casting of Particle-reinforced Functionally Graded Metal Matrix Composites: the Longitudinal Configuration Case”. Trabalho apresentado em FGM2006 – Multiscale and Functionally Graded Materials Conference, Honolulu, 2006. Publicado
Sónia C. Ferreira; Velhinho, Alexandre; Rui J.C. Silva; Luís Augusto Marques da Rocha; Avila, Edith Ariza; J.R. Gomes. “Tribocorrosion Behaviour of Al-based Syntactic Functionally Graded Composites”. Trabalho apresentado em FGM2006 – Multiscale and Functionally Graded Materials Conference, Honolulu, 2006. Publicado
Velhinho, Alexandre; Gérard Vignoles; Peter Cloetens; X. Thibault; E. Boller; Francisco Braz Fernandes; Luís Augusto Marques da Rocha; et al. “Evaluation of SiC-particle Connectivity in Functionally Graded Al/SiCp Composites by Synchrotron Radiation Holographic Microtomography”. Trabalho apresentado em 8th International Symposium on Multifunctional and Functionally Graded Materials, Leuven, 2004. Publicado
Velhinho, Alexandre; P.D. Sequeira; Rui Martins; Gérard Vignoles; Francisco Braz Fernandes; J.D. Botas; Luís Augusto Marques da Rocha. “Evaluation of Al/SiC Wetting Characteristics in Functionally Graded Metal-Matrix Composites by Synchrotron Radiation Microtomography”. Trabalho apresentado em 7th International Symposium on Functionally Graded Materials, Beijing, 2002. Publicado
Velhinho, Alexandre; P.D. Sequeira; F. Braz Fernandes; J.D. Botas; Luís Augusto Marques da Rocha. “Al/SiCp Functionally Graded Metal-matrix Composites Produced by Centrifugal Casting: Effect of Particle Grain Size on Reinforcement Distribution”. Trabalho apresentado em 7th International Symposium on Functionally Graded Materials, Beijing, 2002. Publicado
“Methodologies for optimal design and additive manufacturing of metamaterials combining negative property indexes”. Doutoramento, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2026. http://hdl.handle.net/10362/200942.
Cardoso, João Oliveira. “DESIGN OF 2D AND 3D METAMATERIALS WITH TAILORED THERMOMECHANICAL PROPERTIES”. Doutoramento, 2024. http://hdl.handle.net/10362/175607.
Catatão, Gonçalo Miguel Rodrigues. “Additive Manufacturing and Characterization of Three-dimensional Anepectic Structures”. Mestrado, 2022. http://hdl.handle.net/10362/134774.
Inácio, João Carlos Gomes. “CONCEÇÃO E REALIZAÇÃO DE UM PROTÓTIPO DE EQUIPAMENTO DESTINADO À EXTRUSÃO FRICCIONAL DE MATERIAIS COMPÓSITOS”. Mestrado, 2022. http://hdl.handle.net/10362/153196.
Cândida, Guilherme Veríssimo. “Mimicking bone structures using functionally graded auxetic structures”. Mestrado, 2022. http://hdl.handle.net/10362/134924.
Almeida, Patrícia Lopes de. “Mimicking Intervertebral Disk Mechanical Properties with Functionally Graded Auxetic Composites”. Mestrado, 2022. http://hdl.handle.net/10362/135341.
Duarte, Mariana Monteiro. “Additive Fabrication of Metallic Anepectic meshes”. Mestrado, 2022. http://hdl.handle.net/10362/153469.
Calado, Ricardo Manuel Monteiro. “Additive Manufacturing of Resettable-Deformation Bi-Stable Lattices Based on a Compliant Mechanism”. Mestrado, 2022. http://hdl.handle.net/10362/153502.
Silva, Daniela Barras Nunes Serra e. “Additive Fabrication of 3D Anepectic Structures”. Mestrado, 2021. http://hdl.handle.net/10362/129350.
Matos, Tiago Oliveira. “Substitutos ósseos baseados em compósitos auxéticos com gradientes de funcionalidade”. Mestrado, 2021. http://hdl.handle.net/10362/119341.
Páscoa, Frederico Tomás. “Development of Methodology for Modelling and Simulation of 3D Auxetic Structures”. Mestrado, 2021. http://hdl.handle.net/10362/135860.
Canelhas, João André Soares. “Comportamento mecânico de estruturas auxéticas com gradiente de funcionalidade para substituição de discos intervertebrais”. Mestrado, 2021. http://hdl.handle.net/10362/143932.
Moura, João Henrique Chamorra. “Recuperação e separação das partículas de diamante para reutilização nas ferramentas de corte”. Mestrado, 2019. http://hdl.handle.net/10362/92313.
Rosa, Joana Filipa Magalhães da. “Extrusão friccional de compósitos de policaprolactona reforçados por nanoargilas”. Mestrado, 2019. http://hdl.handle.net/10362/90935.
Parada, João Pedro Almodôvar. “Additive fabrication of electrically controlled anepectic meshes”. Mestrado, 2019. http://hdl.handle.net/10362/92311.
Velhinho, Alexandre. “Additive Manufacturing of Functionally Graded Syntactic Composites”. Mestrado, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2019.
Velhinho, Alexandre. “Additive fabrication of 2D meshes controlled by functionally graded SMA actuators”. Mestrado, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2019.
Parada, João Pedro Almodôvar. “Additive fabrication of electrically controlled anepectic meshes”. Mestrado, 2019. http://hdl.handle.net/10362/92311.
Marcelino, Inês Margarida Neves. “Additive Fabrication of Anepectic Meshes controlled by a NiTi alloy”. Mestrado, 2019. http://hdl.handle.net/10362/97146.
Raminhos, Joana Maria Santos. “Additive Fabrication of Anepectic Meshes”. Mestrado, 2018. http://hdl.handle.net/10362/56321.
Correia, Tiago Filipe Viegas. “Hot forming thermal cycle and material exposure effect on prepreg materials properties”. Mestrado, 2017. http://hdl.handle.net/10362/31873.
Ferreira, Francisco Branco. “Microstructural and Mechanical Characterization of Graphene Oxide-Reinforced Aluminium-Matrix Nanostructured Composites fabricated by Accumulative Roll Bonding™”. Mestrado, 2017. http://hdl.handle.net/10362/37538.
Cardoso, João Oliveira. “Modeling the reverse segregation of reinforcements in functionally graded composites by the longitudinal casting method”. Mestrado, 2016. http://hdl.handle.net/10362/21538.
Duarte, Joana Filipa Flora da Costa. “Produção de compósitos Alumínio/NiTi através do processo híbrido de fricção linear”. Mestrado, 2014. http://hdl.handle.net/10362/13184.
Plácido, Ana Catarina Vicente. “Optimização das condições de cura de compósitos para molde destinado à reparação de defeitos em radome de aeronave”. Mestrado, 2014. http://hdl.handle.net/10362/14167.
Jorge, Pedro Miguel Beira. “Optimização das condições de moldação de materiais compósitos para construção de ferramenta de reparação de defeito em radome de aeronave”. Mestrado, 2014. http://hdl.handle.net/10362/14877.
Fonseca, João Viegas da. “Estruturas 3D porosas com gradiente de funcionalidade produzidas por Freeze-casting”. Mestrado, 2013. http://hdl.handle.net/10362/11885.
León Vigarinho, Pablo Miguel. “Caracterização microestrutural de compósitos com gradiente produzidos por fricção linear (friction surfacing)”. Mestrado, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2013. http://hdl.handle.net/10362/10417.
Bicho, Rita Sofia Lázaro. “Desenvolvimento de estruturas porosas tridimensionais por moldação por congelamento (Freeze-Casting)”. Mestrado, 2012. http://hdl.handle.net/10362/8078.
Velhinho, Alexandre. “Modelação e simulação dos efeitos de segregação transversal em FGMs processados por fundição centrífuga longitudinal”. Mestrado, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2011.
Nascimento, Ricardo Luís Espingardas do. “Produção e caracterização de compósitos inteligentes”. Mestrado, 2009. http://hdl.handle.net/10362/2025.
Silva, António Alexandre Barros da. “Implementação da norma ASTM E2352 para uma sala limpa classe 8.5”. Mestrado, 2008. http://hdl.handle.net/10362/13913.
Velhinho, Alexandre. “Fundição centrífuga de compósitos alumínio/sic com gradiente funcional de propriedades: processamento e caracterização”. Doutoramento, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2003. http://hdl.handle.net/10362/4777.
Campus da FCT Quinta da Torre
(+351) 21 294 8562
cenimat.secretariado@fct.unl.pt
